| Sika®2 | | Sika® 2 is an extra quick-setting waterproofing compound. It is an alkaline, |  | |
| | | alkaline chloride-free, colorless liquid with specific gravity of 1.25 - 1.33 | | |
| | | and does not attack iron. | | |
| | | | | |
| SikaTopSeal®105 | | A cement based, polymer modified, 2 component, multi-purpose water | | |
| | | proofing slurry. SikaTop Seal - 105 combines the crystallization action | | |
| | | (pore block) and the water proofing capability of polymer. It consists of | | |
| | | special fillers, cement and properly graded aggregates. | | |
| | | | | |
| SikaTopSeal®107 | | 2-component, predosed, ready for use waterproofing slurry based on resin | | |
| | | modified cementitious material. | | |
| | | | | |
| Sika®Swell S | | an extrudible swelling profile for construction joints which expands when it | | |
| | | comes in contact with water. Due to its properties, it shows a high efficiency | | |
| | | and a very good adaptability to all kinds of construction joints. | | |
| | | | | |
| Sikaproof® 300 TE | | Waterproofing membrane on the basis of special modified blown bitumen | | |
| | | with a non woven polyester reinforcement of 180 g/m. The reinforcement is | | |
| | | impregnated with a blown bitumen coating. The homogeneity between the | | |
| | | impregnation-compound and the coating-mass ensures a very high resistance | | |
| | | to delamination. A mixture of talcum and sand covers the upper side. | | |
| | | The lower side is finished with a burn away film and has a micro-profile for | | |
| | | improved torching. | | |
